0
Skip to Content
  Western Instruments
  Western Instruments
MAG Particle Inspection
Pit & Welding Gauges
Pre-Weld Demagnetization
Ultrasonics
Portable Ultrasonics
About Us
Our Company
Alex Palynchuk
Product Resource Manuals
Contact
  Western Instruments
  Western Instruments
MAG Particle Inspection
Pit & Welding Gauges
Pre-Weld Demagnetization
Ultrasonics
Portable Ultrasonics
About Us
Our Company
Alex Palynchuk
Product Resource Manuals
Contact
MAG Particle Inspection
Pit & Welding Gauges
Pre-Weld Demagnetization
Ultrasonics
Portable Ultrasonics
Folder: About Us
Back
Our Company
Alex Palynchuk
Product Resource Manuals
Contact
Shop Safety & Premium Yoke
WC-9_Side View.jpg Image 1 of
WC-9_Side View.jpg
WC-9_Side View.jpg

Safety & Premium Yoke

$1,170.00

WC-9

Inspectors will usually only use a Yoke one or two times (maybe an hour) per day whereas an NDE Technician will use an MPI Yoke for a full day. In casual operation, the inspector should only need to charge the Yoke every 3-4 days, while the technician will need to charge every night. The Nickel Metal Hydride Batteries are fully charged in 4-5 hours, and with the smart charger are good for thousands of charging cycles.

Quantity:
Add To Cart

WC-9

Inspectors will usually only use a Yoke one or two times (maybe an hour) per day whereas an NDE Technician will use an MPI Yoke for a full day. In casual operation, the inspector should only need to charge the Yoke every 3-4 days, while the technician will need to charge every night. The Nickel Metal Hydride Batteries are fully charged in 4-5 hours, and with the smart charger are good for thousands of charging cycles.

WC-9

Inspectors will usually only use a Yoke one or two times (maybe an hour) per day whereas an NDE Technician will use an MPI Yoke for a full day. In casual operation, the inspector should only need to charge the Yoke every 3-4 days, while the technician will need to charge every night. The Nickel Metal Hydride Batteries are fully charged in 4-5 hours, and with the smart charger are good for thousands of charging cycles.

Our WC-9 uses the basic Western Instruments WC-Series Platform. This Platform design is similar to our standard W-Series Platforms, but far more compact. This construction versatility is possible through our advanced Mechanical, Electrical, and Solid State Electronics designs. These designs permit the WC-Series to use our standard low profile sealed membrane activation switch, continuing our philosophy for operator safety, as the switch has a grounding provision and conducts less than Ω Watt of power. The urethane rubber housing provides superior durability in rugged environments.

The ergonomically designed housing combined with its light weight, reduces operator fatigue and strain permitting better and longer inspections. The compact design allows the WC-9 to fit into confined spaces better than our full size W-Series Models. Combined with our Universal Articulating Pole Pieces, so the WC-9 can fit almost any configuration of work piece. All W-Series Yokes have more height between the operator's hand and the work piece, which means faster inspection due to a larger view of the target area.

The WC-9 represents one of the greatest technical advancements, in the Portable Magnetic Particle Testing Equipment Industry, with total operator mobility. The WC-9 draws O.5 Amps, so the 13.2 Volt Battery (1.5 Amp Hours) provides a full 2 hours of continuous operation, translating (*) into a typical working day for most operators. The individual cells of the WC-9's Battery Pack are not 'potted', so the Pack can be rebuilt.

The WC-9 meets industry specifications, lifting 50 Pounds (23Kg), for DC Yokes, however the Pulsing DC Field (125Hz) provides better particle mobility than Full Wave DC fields. The WC-9 is supplied with an Battery Voltage Meter, to ensure Lift Capacity.

The WC-9 is designed for operation in Class I, Division 2 Environments, however battery testing and charging is done in a 'safe zone'. Western Instruments Cordless Yokes (WC-9) is the only Yoke of their type in the World!

*Based on Western Instruments Battery Duration Tests

Get a Quote

Our Service Team is ready to assist.


(780) 459-6720

Western Instruments
26509 Township Road 543
Sturgeon County, AB, Canada T8T 1M1

sales@westerninstruments.com

Hours

Monday – Friday
8am – 4:30pm

Follow

Facebook
YouTube

Subscribe to Our Newsletter

Sign up with your email address to receive news and updates.

We respect your privacy.

Thank you!

  ©2025 Western Instruments. All Rights Reserved